Home | Products | CNC routers | Series ACP

Series ACP

Back

VOLTER ACP series CNC Routers are specially designed for processing of composite panels (ACP), HPL panels, fiber cement boards and aluminum sheets. 

These machines have processing area from 3,200*1,610mm to 6,200*2,150mm. This dual spindle version allows to process materials faster, more efficiently and at reduced cost. Processed materials can be easily fixed by vacuum hold down or mechanically. 

Like other VOLTER CNC Routers, the ACP series has a heavy steel frame with thermal stabilization.

Specification model range
Controller VOLTER CS
Max travel speed on X and Y axes, mm./sec. 500 (30 m./min.)
Max travel speed on Z axis mm./sec. 100 (6 m./min.)
Max thickness of material , mm. 160
Spindle power, kW 4.5 to 6.6
Spindle rotation speed, RPM from 1 000 to 24 000
Tool clamping mechanical or pneumatic
Type of drives for X and Y axes Servo, planetary gear heads, helical racks
Type of drive for Z axis Servo, ball screw
Control panel 15" touch monitor
Model Processing area Dimensions Weight, kg
VOLTER ACP3016 3 200 * 1 610 mm 4 300 * 2 100 * 1 600 mm 1 500
VOLTER ACP3020 3 200 * 2 150 mm 4 300 * 2 600 * 1 600 mm 1 800
VOLTER ACP4016 4 200 * 1 610 mm 5 300 * 2 100 * 1 600 mm 1 600
VOLTER ACP4020 4 200 * 2 150 mm 5 300 * 2 600 * 1 600 mm 2 200
VOLTER ACP6016 6 200 * 1 610 mm 7 300 * 2 100 * 1 600 mm 2 600
VOLTER ACP6020 6 200 * 2 150 mm 7 300 * 2 600 * 1 600 mm 3 100

Options

Basic configuration
Brush foot
Steel welded base frame
Touch-screen monitor
Spindles
Vacuum table
Tool length sensor
Laser pointer of the zero point
Helical racks
Hand controller
Options
VECTRIC VCarve Pro software
Tool lubricator
Drag knife
Pressure foot
VOLTER Pneumatic Locator Pins (PLP) System
Phenolic vacuum table
Vacuum pump BUSCH SAMOS 7,5 kW
Vacuum pump BUSCH MINK 4 kW
Dust collector MasterVac TS220
Dust collector MasterVac TS300
Basic configuration
Brush foot

Designed to remove chips and waste from cutting zone. Chips fall into a special chamber mounted on the spindle and are removed through a special pipe into the dust collector.

Steel welded base frame

Steel frames of VOLTER machines is welded from cold-rolled steel pipes. Each frame undergoes thermal stabilization to maintain its geometric dimensions for the full lifetime of the machine. The seats for the installation of linear guides and helical racks are processed by high-precision machining center.

Touch-screen monitor

Touch-screen monitor is the main control panel of VOLTER CNC Routers. This monitor allows to control processing and change settings. User friendly interface has a modern, convenient and intuitive design.

Spindles

VOLTER CNC Routers have air-cooled  spindles from HITECO (Italy) company with power from 4.5 to 10 kW. ER32 collets are used for all spindles. There is a choice between spindles with pneumatic or mechanical clamping. The maximum rotation speed is 24 000 RPM.

Vacuum table

Vacuum hold down is the most effitient solution for fixing the material on the machine during processing. The vacuum table consists of extruded aluminum profiles, a sacrificial PVC layer and a system of hvacuum valves for controlling the vacuum zones. Quantity of vacuum zones varies from 4 to 12 depending on the size of the working field of the machine.

Tool length sensor

The sensor allows to measure the length of the bit quickly and accurately. It is enough to push a botton on touch screen monitor. Results of this measurement will be saved in the controller, which prevents damage of the working surface of the machine.

Laser pointer of the zero point

Laser pointer allows operator to set starting point of a job quickly and easily. It is enough for it to move the laser pointer to angle of sheet and click "Save" button on the touch screen monitor.

Helical racks

Helical racks set in X and Y axes. It increases the accuracy and quality of processing, reduce noise and vibrations during moving.

Hand controller

It is intended to move the cutting tool. It has an indication of the current speed of free movements and buttons to change this speed.

Options
VECTRIC VCarve Pro software

VECTRIC VCarve Pro software to create and prepare 2D and 3D files for CNC Routers. Large selection of formats for importing files, intuitive interface.

Tool lubricator

The system carries out a dosed supply to the cutting zone of lubricant emulsion or air flow. Continuous supply of lubricant (in the form of oil mist) or compressed air lets to maximize tool lifetime, improve  quality of processing and increase speed of processing.  It is necessary to connect an external pressed air supply with a working pressure of at least 6 bar to operate this lubrication system.

Drag knife

This knife is efficient and reliable solution for cutting polymer materials and corrugated board. The main application is cutting along the contour of figures from corrugated cardboard, sheet vinyl, and other polymer sheets. The principle of operation of this knife is that the cutter has free rotation. Tip of the blade due has displacement relative to the axis of rotation. As result, the knife is turned by the cutting edge in the direction of tool movement due to the material resistance.

Pressure foot

This device press on the material around cutting tool to provide high-quality processing of uneven and flexible materials. It is recommended for the processing of warped or curved sheets of a rigid material (for example, aluminum) and for the processing of thin and soft materials.  This device can be also used to remove chips and dust during cutting.

VOLTER Pneumatic Locator Pins (PLP) System

VOLTER Pneumatic Locator Pins lets to improve the performance of our machines for repeatable placement of cutting materials on table.
This system has 2 modes: hand and auto. In hand mode operator can raise and lower locator pins by button on touch screen monitor. In auto mode pins raise after finish of job and lower after start of new job.
Two rows of pneumatic cylinders make the material placement process faster and more precise.

Phenolic vacuum table

The phenolic vacuum table provides a stronger vacuum pressure of the material on the surface. Almost perfectly flat working surface. Almost perfectly flat work surface. This solution allows quick replacement of the exposed layer on the working surface of the machine. It is an excellent choice for working with plastic, acrylic, composite and leather.

Vacuum pump BUSCH SAMOS 7,5 kW

High efficient 7.5 kW vortex blower is supplied complete with air filter, pressure gauge, safety valve and fittings for connecting to the machine. Do not require maintenance during the entire life cycle.

Vacuum pump BUSCH MINK 4 kW

Rotary vacuum pumps Busch MINK (Germany) are an effective and reliable solution for vacuum hold down of materials. The cam rotors do not come into contact with each other or with the cylinder in which they rotate. The extremely small clearances between the cam rotors and the casing optimize the internal seal and guarantee a consistently high pumping speed without using of lubricating fluids.

Dust collector MasterVac TS220

TS 220 is a reliable industrial dust collector for removing chips and dust during processing of various materials. The model is designed to work in the most hard operating conditions. Equipped with an industrial three-phase electric motor 400 V / 2200 W and a vacuum turbine with a side channel. The dust collector has a 30 l chip storage tank.

Dust collector MasterVac TS300

TS 300 is a reliable industrial dust collector for removing chips and dust during processing of various materials. The model is designed to work in the most hard operating conditions. Equipped with an industrial three-phase electric motor 400 V / 2200 W and a vacuum turbine with a side channel. The dust collector has a 100 l chip storage tank.

Please accept the cookies we use. These cookies allow you to seamlessly browse our website, help us analyze traffic, improve and personalize content and advertising. Learn more

Below you will find the categories of cookies used on our website that you can enable or disable. Functional cookies cannot be disabled because they are necessary for trouble-free web browsing. Your cookie settings can be changed in the future using the icon in the footer of the website.

Functional cookies — These cookies are necessary for the proper functioning of our website. Thanks to them, we can, for example, save your cookie settings and allow you to change them in the future.

Analytical cookies — These cookies help us analyze site traffic and track site traffic by collecting anonymous information. Thanks to this data, we can improve our site more efficiently.

Marketing cookies — these cookies help us personalize your advertising, ie.that we will be able to remind you of relevant advertising in the future.