CO2 lasers
ODIN lasers
BackOdin series laser machine combines small size, compact, high quality engraving and cutting at a low cost. With 3G acceleration and 80 IPS (2000mm/sec) engraving speed, it provides a super fast laser engraving solution for industry.
The RF tube allows fantastic beam signature and is air cooled, you don’t have to worry about a water chiller.
The gantry payload is minimal and is super smooth.
Technical Specifications
| Laser System | Odin 22 | Odin 32 | ||
| Laser Tube Wattage | 30 Watt | 60 Watt | ||
| Working Area | 559 x 381 mm | 813 x 508 mm | ||
| Table Size | 625 x 440 mm | 899 x 567 mm | ||
| Max Part Size | 625 x 440 mm x 185mm | |||
| Dimensions(W x D x H) | 1030x860x1090mm | 1284x987x1090mm | ||
| Laser Type | Radio Frequency Laser Tube | |||
| Cooling | Air Cooled | |||
| Maximum Speed | 2000MM/S | |||
| Maximum machining size at 1000 speed – lightweight laser head | 529 x 381 mm | 783 x 508 mm | ||
| Maximum machining size at 2000 speed – lightweight laser head | 461 x 381 mm | 715 x 508 mm | ||
| Speed and Power Control | Computer or manually controlled speed and power from 0-100%.Vector color mapping sets speed and power settings using RGB color mapping. | |||
| Operating Modes | Optimized raster,vector,and combined mode | |||
| Resolution(DPI) | User controlled from 100 to 1000DPI (standard laser head) | |||
| Computer Interface | Ethernet and USB Connection | |||
| Compatible Operating Systems | Windows, Mac, and Linux (Mac and Linux with LightBurn Software) | |||
| Buffer Memory | 128MB Standard | |||
| Display Panel | 3.5″ LCD panel showing current file, total working time, laser power, speed, etc… | |||
| Electrical Requirements | 110 to 240 volts,50 or 60 Hz,single phase | |||
| Z-Axis Height | 185mm | 185mm | ||
| Net Weight | 125kgs | 300kgs | ||
| Motion Control System | High-Speed Stepper Motors | |||
| Speed and Power Control(engraving depth) |
Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping. |
|||
| Operating Modes | Optimized raster, vector, and combined mode | |||
| Ventilation System | Integral exhaust fan. There is 1 output port, 145 mm in diameter in the rear of the case. | |||
| Max. Speed | 2000mm/s | |||
| Workpiece table | Solid metal blades & Honeycomb table | |||
| Max. table load | 20kg / 44lbs | |||
Materials
| Materials | Engrave | Cut |
| Wood | √ | √ |
| Acrylic | √ | √ |
| Delrin | √ | √ |
| Cloth | √ | √ |
| Leather | √ | √ |
| Mat Board | √ | √ |
| Paper | √ | √ |
| Melamine | √ | √ |
| Mylar | √ | √ |
| Pressboard | √ | √ |
| Rubber | √ | √ |
| Wood Veneer | √ | √ |
| Fiberglass | √ | √ |
| Plastic | √ | √ |
| Cork | √ | √ |
| Corian | √ | √ |
| Twill | √ | √ |
| Anodized Aluminum | √ | X |
| Painted Metals | √ | X |
| Tile | √ | X |
| Glass | √ | X |
| Coated Metals | √ | X |
| Ceramics | √ | X |
| Marble | √ | X |
| Stainless Steel | * | X |
| Brass | * | X |
| Titanium | * | X |
| Bare Metal | * | X |
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.